Victron quality without compromise

Victron Centaur battery chargers use aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: vibration, heat, humidity and salt air.

Circuit boards are protected with an acrylic coating for maximum corrosion resistance.

Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.

Universal 90 to 265 Volt input voltage range

All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. Are you sure how much power you are getting when you pull up at that marina in the US, NZ or Australia or even a backwater caravan park. Boat or large motor home this is the ultimate battery charger to go anywhere anytime. With the safety and confidence that it will work always.

Three outputs that each can supply the full output current

Three isolated outputs to simultaneously charge 3 battery banks.

Each output is capable to supply the full rated current... Saving you money and giving simplicity in design and construction of your battery charging system.

Three stage charging, with temperature compensation

The Centaur charges at bulk rate until the output has reduced to 70 % of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate.

An internal temperature sensor is used to compensate the charge voltage with - 2 mV/ºC (- 1 mV/ºF) per cell.

A dip switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM

batteries. Perfect battery charging by Victron energy.

Please download the information PDF or user guide at bottom of the page for further information.

Lead acid & Gel batteries only.

Size 12V 30A 3C

RRP AU$629.00.

Our price AU$566.00 + Delivery